DENT REMOVAL
Paintless Dent Repair
Lefty's Auto Crafters lifts door dings, creases, and hail dents from your panels with paintless dent repair, and your factory paint stays untouched.
Call (832) 494-6136What We Fix
Dings, creases, and minor dents, gone without a drop of paint.
Common Dents
- Door Ding Repair
- Parking Lot Dents
- Crease Repair
- Minor Hail Dents
Our Methods
- Rod Push Technique
- Glue Pull Repair
- Panel Access
- Same-Day Turnaround
What Stays
- Factory Paint Intact
- No Filler Used
- Original Finish Kept
- Resale Value Held
How Paintless Dent Repair Works
Paintless dent repair reshapes the metal from behind the panel, so there is no sanding, no filler, and no repainting. Our technicians reach the back of the dent through door jambs and trim openings, then massage the steel or aluminum back to its original contour.
Because the factory finish never gets touched, the repair keeps your paint, your warranty, and your resale value intact. It also takes a fraction of the time of conventional bodywork, so most single dents are done the same day.
- Door ding and parking lot dent repair
- Crease and body-line dent removal
- Glue pull for hard-to-reach panels
- Rod and lever dent massaging
- Same-day turnaround on most dents
- Factory paint left fully intact
Why Drivers Choose PDR Here
The right fix for dents when the paint is still good.
Your Paint Stays Put
We never sand, fill, or repaint, so your original factory finish and warranty stay exactly as they were.
Done the Same Day
Most single dents take under an hour, so you drop by and drive off the same day.
Twenty Years of Feel
DJ Lefty Ray has 20-plus years reading metal by hand and knowing how far it moves.
An Honest Assessment First
If a dent is better fixed the conventional way, we tell you straight up front.
The Tools We Use
Good paintless work is all about the right tools and a steady, trained hand.
PDR Rods
Long steel rods that reach behind the panel to push each dent out.
Glue Pull Tabs
Tabs that grip the surface to pull flat-panel dents where there is no access behind.
LED Reading Board
A lit line board that shows every high and low spot as we shape the metal.
Trained Hands
Years of feel for how steel and aluminum move, so the panel ends up dead flat.
Got a Dent or Ding?
Send us a photo or drop by, and we will tell you if paintless repair is the right fix.
How PDR Goes
Six steps, most done the same day.
Inspect and Quote
We check each dent's size, depth, and spot on the panel, then give you a written price.
Reach the Panel
We open a door jamb, trim piece, or window channel to reach behind the dent.
Work the Dent
Using rods or glue tabs, we push and coax the metal back to its factory shape.
Fine Detailing
We make tiny adjustments under the light board until the surface reads perfectly smooth.
Quality Check
A final look under LED lighting confirms the repair is invisible from every angle.
Clean and Return
We reassemble the trim, wipe down the panel, and hand your vehicle back ready to drive.
Recent Dent Work
Real dings and creases, lifted clean at our shop.
What Our Dent Customers Say
Real reviews from local drivers, straight off Google.
Lefty's did a beyond phenomenal job with my truck!... I wish I could leave more than five stars for this review! My truck looks better than it did when I bought it!
DJ is Amazing!!! We were having terrible trouble with our accessible bus and could not get anyone to fix it. DJ came in and, within an hour, had it running! He also fixed one of the accessible doors. Very honest and trustworthy. Super nice! As a woman, I felt safe and heard. Reasonably priced! Highly Recommended!!!
So nice to find a shop that is capable, affordable and that actually deliver on what they say. Trustworthy crew and truly take care of your vehicle while in thier care.
DJ is the bomb, always helpful & knowledgeable i would recommend the anytime for your vehicle servicing or repairs.
Backed for Life
Every dent we lift carries a lifetime workmanship warranty, good for as long as you own the vehicle. Because we never touch the paint, there is nothing to peel or fade, and if the dent ever shows again, we set it right.
Common Dent Repair Questions
Most dents run $75 to $250 to fix, based on the size, depth, and spot on the panel. Small door dings start around $75, while long creases cost more. You get a written estimate before we start, so the price is clear.
Paintless dent removal reshapes your vehicle's metal from behind the panel, without disturbing the paint. Our technician reaches the back of the dent through an opening and works the metal back to its original form. The factory finish stays completely intact.
Most single-dent repairs take 30 minutes to an hour. A few dents or a longer crease can run two to three hours. Compared with conventional bodywork that ties up your vehicle for days, PDR gets you back on the road the same day.
Door dings are the most common repair we handle, and PDR is built for them. The small round dents left by car doors in parking lots pop right out when the paint is unbroken. We restore the panel to like-new shape quickly and affordably.
PDR costs far less than conventional body work, keeps your factory paint, and takes a fraction of the time. With no filler or repainting, it also protects your resale value. For any dent where the paint is intact, paintless repair is the best option.
Dents where the paint has cracked, chipped, or scratched through need conventional repair instead. Very sharp creases with stretched metal, or dents on the edge of a panel, can also fall outside PDR range. We assess your damage in person and recommend the best method.
Related Services
Related fixes when a dent needs more.
Make That Dent Disappear
Call Lefty's Auto Crafters at (832) 494-6136 for a written estimate, no obligation. Most dents come out the same day, with your factory paint untouched.
Call (832) 494-6136